Seliar Synergy Permanent Hair Colour Cream Application Instruction

 

Seliar Synergy Permanent Hair Colour Cream

Synergy Color must be mixed with the special Synergy Activator Cream.

 

Mixing Hair Color Cream at 1:1.5 with Synergy Activator Cream will achieve the best result.

Mixing ratio for superlightener colors is 1:2 with 30V or 40V

 

The Superlightener colors must be used from a level 6 or lighter for the quality result.

 

a) PREPARATION:

Mix in a non-metallic bowl 50 ml of SYNERGY COLOR with 75 ml of SYNERGY CTIVATOR CREAM (Superlightener: 50 ml SYNERGY COLOR + 100 ml SYNERGY ACTIVATOR CREAM).

 

b) APPLICATION:

Apply the color mix evenly to dry unwashed hair.

 

c) RINSING:

Once processing time is over work into a lather, then rinse off well until the water runs clear and shampoo with SELIÀR NOURISHING SHAMPOO

 

Coloring Virgin Hair  (depending on base color)

Apply color 3 cm from scalp to ends then apply to roots

Level of Lift       Mix               Developer                             Time

0 to 1        1:1.5           3% (10V)         20 to 30 mins

1 to 2           1:1.5                6 % (20V)             30 to 40 mins

2 to 3           1:1.5                9% (30V)              40 to 50 mins

3 to 4           1:1.5               12% (40V)             50 mins  

 

Grey hair coverage 

0 – 20% White Hair

Fashion shade + 1 or 2 inches of Natural shade to hold color.

1part of color and 1 or 1 ½ part of peroxide.

 

20 – 30% White Hair

½ Natural shade + ½ Fashion shade for 100% coverage and color hold.

1part of color and 1.5 part of peroxide.

30% or More of White Hair

½ Natural shade + ½ Fashion shade for 100% coverage and color hold.

1part of color and 1 part of peroxide.

 

This will be dependent on the color effect you are creating.

Apply color to hairline first and then apply color along the part line to intensify processing in these areas, if the hair is resistant.

 

Touch Ups 

Apply color to re-growth, time for 20 minutes,   and then apply through to mid lengths and ends, up to 25 minutes

 

Toning Blonde

Use 10V, 1 part of color and 1.5 or 2 parts developer. 

Apply on damp towel dried hair, process for 10 min to achieve desire tones. 

Seal you’re your toned color with good quality conditioner. 

 

For difficult resistant grey hair.

1/3 Natural Extra shade (33.0 – 88.0) + 2/3 Fashion shade for 100% coverage and color hold.

Use of 10, 20, 30 or 40 volume peroxide: 1part of color and 1.5 part of peroxide. 

This will be dependent on the color effect you are creating. 

The Natural intense shades are strong in pigmentation (cooler natural), suggest to use one shade lighter to mix with fashion shades:

Eg: 30g of 6.32 + 10g of 77.0 + 60g of 20V.(if natural base is level 5). 

Apply color to hairline first and then apply color along the part line to intensify processing in these areas, if the hair is resistant.

 

First time application

Apply the colour mix to dry hair, starting at a distance of 1 cm from the root area, and along lengths and tips, leave on for 20 minutes. Prepare fresh colour and apply to the roots, leave on for 25/30 minutes 

Touch Up regrowth 

Apply color to re-growth, time for 25-30 minutes,   and then apply through to mid lengths and ends, up to 20 minutes. 

Lifting Blondes

Use 20V, 1 part color to 1.5 parts developer if your hair already blonde and you are lifting it only one to two shades.  Those with Dark Blonde and Light Brown hair will need to mix with 30v or 40v peroxide.  Always consider the underlying pigment when coloring lighter and the amount of pigment to create your desire result.  

Toning Blonde

Use 10V 1 part of color and 2 parts developer. 

Apply on damp towel dried hair, process for 10 min to achieve desire tones. 

Seal you’re your toned color with good quality conditioner.

For vibrant fashion tones use 1 part color to 1 part developer. 

When using Echos Color, for tone on tonecolouring and as a toner on damaged hair we recommend that the cream is diluted at the following ratio 1+2 with the cream activator at 7V (2.1%).

 

The Echosline toners have been formulated to reach excellent results on totally decoloured and bleached hair, contrasts, sun-kissed effects, balayages, and contrasts.

 

Superlighteners

This series is used to lighten hair up to 5 shades without bleaching.

It is a kinder alternative to bleaching hair.

The Superlighteners have the added bonus of also colouring hair at the same time.

Super lighters Suit for natural base from Level 6 and above without too much red or orange pigment.  For natural base colours from level 1 – 5 will need to be bleached and then toned. 

Mixing Ratio:  1 + 2 ( 60 ml x  Superlightener  +  120 ml x 40 Volume Peroxide) 

5 new Superlightener colorsm S12.0, S12.1, S12.2, S12.31, S12.7

• tone down the following highlights presents in natural hair color red (S12.1), orange (S12.2) and yellow (S12.7).

• S12.0 --- Boosts all the other superlighteners to reach a highly cosmetic color result. 

Suggest to mix S12.1, S12.2, S12.31or S12.7 (1/3) with base S12.0 (2/3) to achieve the best result. 

Seliar Synergy Permanent Hair Colour Cream

synergy-color-chart-new